Z-Wave: Configuring DSB09104 ZWUS Energy Monitor

From Universal Devices, Inc. Wiki
Jump to: navigation, search

Just as any Z-Wave device, DSB09104-ZWUS has some parameters that can be configured The most important of which are voltage, units, and reporting interval.

  • Right mouse click on the associated node | Z-Wave | Set Configuration Parameter:
  1. Choose Parameter 1 from the Parameter Number drop down, for Parameter Value enter your voltage (i.e. 120), then click the Set button
  2. Choose Parameter 101 from the Parameter Number drop down, for Parameter Value enter 14 for auto reporting, then click the Set button
  3. Choose Parameter 111 from the Parameter Number drop down, for Parameter Value enter the report interval (i.e. 10), then click the Set button