ISY-99i/ISY-26 INSTEON:Installation

From Universal Devices, Inc. Wiki
Jump to: navigation, search

ISY-26 Installation

Please perform the following steps before plugging the ISY into power:

  • Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
  • Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
  • Plug in the PLM into a power outlet
  • Plug in the power supply into ISY and then into a power outlet

ISY-99i Series Installation

Please perform the following steps before plugging the ISY into power:

  • Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
  • Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
  • Plug in the PLM into a power outlet.





ISY-26 INSTEON / ISY-99i Series INSTEON : User Guide