ISY-99i/ISY-26 INSTEON:Installation: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
====ISY-26 Installation==== | ====ISY-26 Installation==== | ||
Please perform the following steps before plugging the ISY into power: | Please perform the following steps before plugging the ISY into power: | ||
*Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY | *Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY [[ISY-99i/ISY-26_INSTEON:Quick_Start_Guide#Host_Computer_Configuration|Host_Computer_Configuration_Guide]] | ||
*Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY | *Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY | ||
*Plug in the PLM into a power outlet | *Plug in the PLM into a power outlet | ||
*Plug in the power supply into ISY and then into a power outlet | *Plug in the power supply into ISY and then into a power outlet | ||
====ISY-99i Series Installation==== | ====ISY-99i Series Installation==== | ||
Please perform the following steps before plugging the ISY into power: | Please perform the following steps before plugging the ISY into power: | ||
*Connect one end of the first Ethernet cable to the ISY jack marked '''Network''', and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY | *Connect one end of the first Ethernet cable to the ISY jack marked '''Network''', and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY [[ISY-99i/ISY-26_INSTEON:Quick_Start_Guide#Host_Computer_Configuration|Host_Computer_Configuration_Guide]] | ||
*Connect one end of the second Ethernet cable to the ISY jack marked '''Port A''', and the other end to your PLM. | *Connect one end of the second Ethernet cable to the ISY jack marked '''Port A''', and the other end to your PLM. | ||
*Plug in the PLM into a power outlet. | *Plug in the PLM into a power outlet. | ||
Latest revision as of 10:50, 5 April 2009
ISY-26 Installation
Please perform the following steps before plugging the ISY into power:
- Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
- Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
- Plug in the PLM into a power outlet
- Plug in the power supply into ISY and then into a power outlet
ISY-99i Series Installation
Please perform the following steps before plugging the ISY into power:
- Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
- Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
- Plug in the PLM into a power outlet.