ISY-99i/ISY-26 INSTEON:Installation: Difference between revisions

From Universal Devices, Inc. Wiki
Jump to navigation Jump to search
No edit summary
Line 1: Line 1:
====ISY-26 Installation====
====ISY-26 Installation====
Please perform the following steps before plugging the ISY into power:
Please perform the following steps before plugging the ISY into power:
*Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY Installation and Configuration Guide on the accompanying CD
*Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY [[ISY-99i/ISY-26_INSTEON:Quick_Start_Guide#Host_Computer_Configuration|Host_Computer_Configuration_Guide]]
*Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
*Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
*Plug in the PLM into a power outlet
*Plug in the PLM into a power outlet
*Plug in the power supply into ISY and then into a power outlet
*Plug in the power supply into ISY and then into a power outlet


====ISY-99i Series Installation====
====ISY-99i Series Installation====

Revision as of 10:49, 5 April 2009

ISY-26 Installation

Please perform the following steps before plugging the ISY into power:

  • Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
  • Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
  • Plug in the PLM into a power outlet
  • Plug in the power supply into ISY and then into a power outlet

ISY-99i Series Installation

Please perform the following steps before plugging the ISY into power:

  • Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY Installation and Configuration Guide on the accompanying CD.
  • Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
  • Plug in the PLM into a power outlet.





ISY-26 INSTEON / ISY-99i Series INSTEON : User Guide