ISY-99i/ISY-26 INSTEON:Installation: Difference between revisions

From Universal Devices, Inc. Wiki
Jump to navigation Jump to search
(Created page for wiki reorganization; moved contents for ISY-26, added contents for ISY-99i series.)
 
m (Wiki reorganization - footer.)
Line 16: Line 16:




[[ISY-26 Insteon|ISY-26 Insteon  : ]][[ISY-26 Insteon:User Guide|User Guide :]]
----
[[ISY-26 INSTEON|ISY-26 INSTEON:]]
[[ISY-99i Series INSTEON|ISY-99i Series INSTEON:]]
[[ISY-99i/ISY-26 INSTEON:User Guide|User Guide:]]

Revision as of 00:15, 16 May 2008

ISY-26 Installation

Please perform the following steps before plugging the ISY into power:

  • Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY Installation and Configuration Guide on the accompanying CD
  • Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
  • Plug in the PLM into a power outlet
  • Plug in the power supply into ISY and then into a power outlet


ISY-99i Series Installation

Please perform the following steps before plugging the ISY into power:

  • Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult ISY Installation and Configuration Guide on the accompanying CD.
  • Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
  • Plug in the PLM into a power outlet.




ISY-26 INSTEON: ISY-99i Series INSTEON: User Guide: