ISY-99i/ISY-26 INSTEON:Installation

From Universal Devices, Inc. Wiki
Revision as of 10:50, 5 April 2009 by Rand (talk | contribs) (→‎ISY-99i Series Installation)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

ISY-26 Installation

Please perform the following steps before plugging the ISY into power:

  • Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
  • Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
  • Plug in the PLM into a power outlet
  • Plug in the power supply into ISY and then into a power outlet

ISY-99i Series Installation

Please perform the following steps before plugging the ISY into power:

  • Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
  • Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
  • Plug in the PLM into a power outlet.





ISY-26 INSTEON / ISY-99i Series INSTEON : User Guide