ISY-99i/ISY-26 INSTEON:Linking a MorningLinc

From Universal Devices, Inc. Wiki
Revision as of 03:31, 9 September 2010 by Rand (Talk | contribs) (Created page with ''''==MorningLinc Linking== Linking a MorningLinc is the same as for most other Insteon devices with a few changes. ISY firmware 2.8.2+ # Manually link the MorningLinc to the Lo...')

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

==MorningLinc Linking==

Linking a MorningLinc is the same as for most other Insteon devices with a few changes. ISY firmware 2.8.2+

  1. Manually link the MorningLinc to the Locks(s)
  2. See Link Management Menu to start the ISY to Add New Link.
  3. Select the third option 'Add devices found in links and keep existing links'.
    • If you select 'Remove existing links' it removes all links from the MorningLinc and due to the security measures on the MorningLinc the PLM can no longer send commands to it.
  4. Link the MorningLinc by pressing the Set button for 3-5 seconds.




ISY-26 INSTEON / ISY-99i Series INSTEON : How-To Guide

ISY-99i/ISY-26 INSTEON:Link Management Menu