ISY-99i/ISY-26 INSTEON:Linking a Trigger Link

From Universal Devices, Inc. Wiki
Revision as of 04:54, 28 December 2009 by Rand (Talk | contribs) (TriggerLinc FAQs)

Jump to: navigation, search

TriggerLinc Linking

The Insteon TriggerLinc cannot be linked using Auto Discover.

  • Menu - Link Management/New INSTEON device
  • Enter the address.
    • The TriggerLinc address is on a sticker inside the battery compartment.
  • Select the TriggerLinc [10.02] from the drop down list.
  • Click Ok.
  • Press and Hold the Set button for 5 seconds to put the TriggerLinc in linking mode as per the requester.
Press and Hold the Set button for 5 seconds
  • Click OK.
  • Wait while the ISY initializes communications with the TriggerLinc.

TriggerLinc FAQs

  • To access the TriggerLinc, one or more Access Points must be installed.
    • Tip: Plug an Access Point into the PLM for positive results.
  • The Set button toggles Motion Off and On.
  • The TriggerLinc must be “awake” to hear messages.
    • Tip: Put the TriggerLinc into linking mode to keep it awake for 4 minutes.
    • The TriggerLinc can be taken out of linking mode by pressing the Set button twice.

ISY-26 INSTEON / ISY-99i Series INSTEON : How-To Guide

ISY-99i/ISY-26 INSTEON:Link Management Menu