ISY-99i/ISY-26 INSTEON:Linking an IRLinc Transmitter

From Universal Devices, Inc. Wiki
Revision as of 16:18, 26 September 2018 by Mkohanim (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Linking an IRLinc Transmitter

ISY firmware 2.7.12 and above

  1. If you are starting from scratch, factory reset your 2411T
  2. Go to Link Management | Add Button to IRLinc Transmitter
  3. Follow the instructions on the screen

  • The nodes (buttons) have to be placed in a scene in order to send commands to the IRLinc TX.
  • You can have multiple IRLinc TX buttons in a scene. The order of activation is the same as the order in which they were added to the scene.


You have to make sure you have a specific firmware (SH usually helps updating your firmware to work with ISY). You need V1.3.

IRLinc Manual

ISY-26 INSTEON / ISY-99i Series INSTEON : How-To Guide

ISY-99i/ISY-26 INSTEON:Link Management Menu