View source for ISY-99i/ISY-26 INSTEON:Release Notes 2.7.15

=Enhancements=
: [http://forum.universal-devices.com/viewtopic.php?t=4554 Upgrade Instructions]
==ISY-26 & ISY-99i==
* Updated instructions for linking an IRLinc
* Added Rain Rate to WB module 
* Added support for SWL220 w Beeper
* Added Device/Node paths in the programs
* Alphabetical sorting of groups/nodes in the Chart utility
* Support for SwitchLinc-Relay-INSTEON-Remote-Control-On-Off-Switch-Non-Dimming 
* Support for LampLinc 2-Pin Dimmer 2457D2X
* Log date format changed to yyyy.mm.dd hh:mm:ss 
* Notifiations to different email groups
* Enhancements for Mutually Exclusive Buttons
* KPL brightness adjusted through programs
* KPL Buttons Switching (When A is on turn B off but not vice-versa)
* Rename all grouped/associated buttons at the same time
* Include the Scene's Address in the View
* Topology improvements
* Better firewall handling (network priorities)
* Motion Sensor Low Bat status can now be cleared by doing a query on the node
* Locate Me ... locates the closest match to the city where the IP is originating from
* Support for B2457D2 LampLinc BiPhy Dimmer
* Enhanced images for the programs
* Added Fast On/off to switches
* IOLinc timer values now in 10th of seconds
* Can now find ISY by simply typing http://isy in your browser (Windows)
* Can now update network settings (IP address, mask, gateway, dns, ports) from the Admin Console
* Folders with Conditions are Flagged
* Do not close window when user initiates a scene test
* Support for folders in HTML, Topology, and the log 
* Disabled programs to show up with red X
* KPL (V2) non toggle status now shows on/off
* Warnings for firmware update/ISY restore
* Folders are flagged when modified
* Newer SwitchLincs include the ability to adjust the LED brightness level
* Applet-less operations using JNLP (no browser necessary) 
* Support for TriggerLinc (multi-mode) 
* Performance improvements with priority given to program execution
* Support for LampLinc sense (you can use LampLinc v33 and above as controller)

* Support for SWL Relay with Sense
* Support for InlineLinc Relay with Sense 

* Show all buttons in the overview/HTML
* Support for new KPLs 
* Added folders to chart nodes
* Added Control parameter for BiPhy LampLincs

* Backlight for SwitchLincs
* Better upgrade handling in the presence of firewall software
* SwitchLinc now uses 0-255 for backlight level in programs
* Replace device will update programs
* Search/Replace now correctly finds entries with <not> 
* Added on levels for programs for LampLinc BiPhy
* Support for Icon ApplianceLinc 3-Pin
* Support for Icon Relay 2876SB
* Support for ApplianceLinc/Outdoor module 2456S3E
* Support for Icon Switch Dimmer 2876DB
* Support for ToggleLinc V5
* Backlight adjustable through programs
* Topology filename now includes the date
* Toolbar: New Folder is now context sensitive
* Move dialog now lists controllers in red and responders in green

==99i Series Only==
* Support for BEEP
* Support for V2 Thermostats
* Adding an Action of Thermostat Query … when Admin Console is restarted, it comes back with Null
* Support for SDHC SD Cards with capacities up to 16GB
* New folder is now automatically moved to the selected parent folder if any
* Support for Brultech ECM1240

* Flex Your Power Error
* Flex Your Power status
* Support for IRLinc TX 
* You can now group devices with more than one node by using Group Devices menu option
* Support for folders to group devices/scenes (into rooms/locations/etc.)
* Disable device feature allows you to disable a device (not addressed in queries)
* REST now available to all 99 series (no module required)
* Support for Flex Your Power (CA)
* WebServer now under Networking tab (PLEASE NOTE GUI CHANGE)
* WOL - Requires the Networking module
* Network Resources (call other systems using TCP/HTTP/HTTPS/UDP/Multicast) - Requires the Networking modules
** Duplicate/copy a rule
** Export rules
** Import rules (adds to the current configuration)
** Restore rules (overwrites the current configuration)
** Added C Escaped mode which allows one to add special characters in an otherwise Raw Text mode (i.e. \r \n \t, etc.) 

* Load IR Config/Harmony integration


==99i Series PRO Only==
* Batch Mode
* Estimate time to create scenes
* When 'Restore PLM' fails, user should be provided with a list of which devices failed
* Failed Linking Cleanup
* Notification to the Admin Console of what device is going to be restored 


==Developer==
* /rest/nodes now returns setpoints and mode for thermostats (99i only)
* all returned properties now include a UOM
* /rest/nodes/devices ... returns only devices but no scenes
* /rest/nodes/scenes ... returns only scenes but no devices 
* WSDL 2.0 - WS-I compliant Document/Literal
* /rest/sys -- system configuration
* /rest/time -- system time
* /rest/network -- network configuration 
* /rest/nodes/folders -- returns folders (99i only) 

The following services were added:
* AddFolder
* RemoveFolder
* RenameFolder
* SetParent

===WSDK updates with the schema for the latest nodes config.===
* DriverError – INSTEON specific errors
* LastError – A list of driver errors
* GetLastError – Returns LastError
* ClearLastError – Clears LastError

===Networking 99i===
* /rest/networking/resources -- returns network resource config
* /rest/networking/resources/<id> -- activates the resource identified by id
* /rest/networking/wol -- returns WOL config
* /rest/networking/wol/<id> -- activates the WOL rule identified by id

===99i PRO Series Only===

* /rest/nodes/<node>/write -- Writes all pending changes to the device
* /rest/batch -- Returns batch mode "<batch><status>[0|1]</status></batch>"
* /rest/batch/on -- Does not write changes to device, only to .REC files
* /rest/batch/off -- Writes all pending changes to devices and no longer buffers changes
* /rest/batteryPoweredWrites/on -- Writes all pending changes to battery powered devices when batch is off.
* /rest/batteryPoweredWrites/off -- Does not write changes to battery powered devices when batch is off.



[http://forum.universal-devices.com/viewtopic.php?t=4554 Upgrade Instructions]

----
[[ISY-26 INSTEON|ISY-26 INSTEON]] '''/'''
[[ISY-99i Series INSTEON|ISY-99i Series INSTEON]] ''':'''
[[Main Page]]