ISY-99i/ISY-26 INSTEON:Release Notes 2.7.15

Enhancements

• Updated instructions for linking an IRLinc
• Added Rain Rate to WB module
• Added support for SWL220 w Beeper
• Added Device/Node paths in the programs
• More consistent naming/icons for batch/battery devices (PRO only)
• Alphabetical sorting of groups/nodes in the Chart utility
• Support for SwitchLinc-Relay-INSTEON-Remote-Control-On-Off-Switch-Non-Dimming
• REST api for battery powered device writes
• Support for LampLinc 2-Pin Dimmer 2457D2X
• Log date format changed to yyyy.mm.dd hh:mm:ss
• Notifiations to different email groups
• Enhancements for Mutually Exclusive Buttons
• KPL brightness adjusted through programs
• KPL Buttons Switching (When A is on turn B off but not vice-versa)
• Rename all grouped/associated buttons at the same time
• Include the Scene's Address in the View
• Topology improvements

99i Series Only

• Support for BEEP
• Thermostats cannot be included in scenes
• Support for V2 Thermostats
• Support for SDHC SD Cards with capacities up to 16GB
• New folder is now automatically moved to the selected parent folder if any

99i Series PRO Only

• Batch Mode
• Estimate time to create scenes
• When 'restore PLM' fails, user should be provided with a list of which devices failed
• Failed Linking Cleanup
• Notification to the Admin Console of what device is going to be restored

Developer - 99i PRO Series Only

/rest/nodes/<node>/write -- Writes all pending changes to the device

Batch /rest/batch -- Returns batch mode "<batch><status>[0|1]</status></batch>" /rest/batch/on -- Does not write changes to device, only to .REC files /rest/batch/off -- Writes all pending changes to devices and no longer buffers changes /rest/batteryPoweredWrites/on -- Writes all pending changes to battery powered devices when batch is off. /rest/batteryPoweredWrites/off -- Does not write changes to battery powered devices when batch is off.

Bug Fixes

• Fixed the log/chart bug (on multiple drives)
• Fixed the KPL backlight issue
• Charts did not show the correct value for nodes in folders
• Added folders to chart nodes
• Folders with the same name could not be added
• Null pointer exception for pop up menu at the edges of the screen
• Network Module/Web Server - could not add files after removing directories
• Linux - Network Module/Web Server - could not drag/drop directories
• Added Control parameter for BiPhy LampLincs
• Adding an Action of Thermostat Query … when Admin Console is restarted, it comes back with Null
• The nodes in program are sorted by their names and not by the path. So, devices in the same folder but with different names are not listed sequentially
• 2476D w/sense ... no on levels in programs
• KPL sub button status not reflected correctly in the case of All On/All Off
• Crash while migrating IRLinc TX files
• UD Chart showing invalid dates
• Log shows invalid characters when done through HTML interface
• Replace does not update the Adjust Scene settings
• TriggerLinc had dim/bright buttons
• Remove individual IRLinc buttons
• ActionTec/Westell Verizon FIOS routers blocked all TCP connections
• Network Module/MAC ... copy from left to right instead of drag/drop
• Right mouse click on multi-selected nodes deselects everything
• EZRain Query intermittent
• File open error when adding a device using “New Insteon Device”
• Error when adding an I2 only device to ISY (such as Motion Sensor)
• Cannot update KPL OL/RR for secondary button in a scene
• Scene OL/RR shows 0%/9min for some links
• i2 calibration is done twice when devices are added by address
• X10 configuration caused system to crash
• X10 devices with unit codes 16 never reported status
• Program Copy should copy Enabled state
• Children of main node would turn blue if inside folders
• Duplicate warning on button grouping reset
• 2876D does not show the on levels in the programs
• Network Module ... duplicate entries for each time the panel is displayed
• Netwrok Module ... menu items are quirky
• Run at startup flag not set properly

• Backlight for SwitchLincs
• Log entries show zero when queried by programs
• Filenames are now of the form
• IRLinc TX issues
• Better upgrade handling in the presence of firewall software
• Restore device on Motion Sensor does not prompt for programming mode

• Program Copy should copy Enabled state

• A variety of system configuration file issues contributing to many issues mostly affecting KPLs and links between devices.
• Canceling the address book causes maintains the state forever as such no new emails could be added
• MAC: In address book dialog, Add button not visible
• SwitchLinc now uses 0-255 for backlight level in programs
• Replace device should update programs
• Search/Replace now correctly finds entries with <not>

• Mutually Exclusive Buttons have incorrect Status
• Linux: ISY Finder always shows Not Found
• Linux: Discoloration on the Configuration tab
• Web Server tab blank
• Sliders missing in the Scene view
• IOLinc Options are wrong on GUI
• Notification Timestamps are different from Last Runtime Timestamps
• Notifications not sent if multiple happens at close intervals

• SSL utility now points to https://www.homeorchestrator.com/ssl/insteon
• IOLinc Sensor should act as a controller only (not a responder)
• IOLinc momentary timeout has no effect
• rest/sys inoperable
• Added on levels for programs for LampLinc BiPhy
• Restore device did not restore KPL button linkages on the same device
• Restore device did not restore KPL button toggle modes

• Mail send is too slow ... minor performance improvements
• Progress bar visible even if application iconified
• Added support for Icon ApplianceLinc 3-Pin
• Added support for Icon Relay 2876SB
• Added support for ApplianceLinc/Outdoor module 2456S3E
• Added support for Icon Switch Dimmer 2876DB
• Added support for ToggleLinc V5
• Backlight adjustable through programs
• Topology filename now includes the date
• Toolbar: New Folder is now context sensitive
• Move dialog now lists controllers in red and responders in green

MAC Only

• Logs using Excel does not work
• SSL Certificate utility does not work on MAC