Difference between revisions of "ISY-99i Series INSTEON"
From Universal Devices, Inc. Wiki
Yardman 49 (Talk | contribs) |
|||
Line 16: | Line 16: | ||
'''Migration from ISY-26''' | '''Migration from ISY-26''' | ||
# Locate a working ISY-26 backup file | # Locate a working ISY-26 backup file | ||
− | # Login to Administrative Console and choose File->Restore ISY | + | # Login to the 99i Administrative Console and choose File->Restore ISY |
# Choose the backup file identified in the first step | # Choose the backup file identified in the first step | ||
+ | '''NOTE:''' the reverse function '''cannot''' cannot be performed, i.e., a backup file from a 99i '''cannot''' be restored onto an ISY-26. | ||
Revision as of 02:13, 3 January 2008
The ISY-99i Series have the same capabilities as 26 series but with the following additions:
- Optional IR (input only) support - Any RC5/Philips/Universal Remote
- Optional Support for 1024 device/scene combinations (PRO package)
- Optional Support for a lot more Programs
- Does not require an external Power Supply - it's powered through the PLM
Documentation
Unless listed in this section, the documentation for 99i is the same as ISY-26 Insteon.
Migration from ISY-26
- Locate a working ISY-26 backup file
- Login to the 99i Administrative Console and choose File->Restore ISY
- Choose the backup file identified in the first step
NOTE: the reverse function cannot cannot be performed, i.e., a backup file from a 99i cannot be restored onto an ISY-26.
Reboot
- Use a sharp object to push in the Reset Button (on the front panel)
Reset Userid/Password to admin/admin
- Use a sharp object to push in the Reset Button till the RX, TX, Mem, Error lights start blinking (every second)
- Hold for 5 seconds till the RX, TX, Mem, Error lights turn on/off consecutively (RX -> Tx -> Mem -> Error)
- Release
Factory Reset
- Use a sharp object to push in the Reset Button till the RX, TX, Mem, Error lights start blinking (every second)
- Hold for about 10 seconds until all of the the RX, TX, Mem, Error lights turn off and Mem light starts flashing really quickly
- Release and wait for system reboot (reboot is complete when Mem light stops flashing)
Tutorials
References
- EHX Fall 2007 Show Report - by MikeB
- Review of ISY-99i/IR PRO - by MikeB
- Codename ISY 99.9 (Forum) - Information