ISY-99i Series INSTEON:Temperature Alert Program

From Universal Devices, Inc. Wiki
Jump to: navigation, search

Temperature Cold

These programs Wait 5 minutes so if the Temperature is fluctuating is doesn't keep sending Notifications. The Temperature has to remain above or below the set point for 5 minutes.

If
   - No Conditions - (To add one, press 'Schedule' or 'Condition')
 
Then
        Wait  5 minutes 
        Send Notification to All
        Run Program 'Temperature Warm' (Else Path)
 
Else
   - No Actions - (To add one, press 'Action')
 
Cold = True
Warm = False

Temperature Warm

If
   - No Conditions - (To add one, press 'Schedule' or 'Condition')
 
Then
        Wait  5 minutes 
        Send Notification to All
        Run Program 'Temperature Cold' (Else Path)
 
Else
   - No Actions - (To add one, press 'Action')
 
Warm = True
Cold = False


These programs run when the temperature crosses the threshold. This example uses 32F. When the program in the If statement is True it means a Notification has already been sent and this program will quit.


Weather Cold

If
        Module 'Climate' Temperature < 20 °F
    And Program 'Temperature Cold' is False
 
Then
        Run Program 'Temperature Cold' (Then Path)
 
Else
   - No Actions - (To add one, press 'Action')
 
When the temperature falls
Only runs if it was warm during last check


Weather Warm

If
        Module 'Climate' Temperature >= 20 °F
    And Program 'Temperature Warm' is False
 
Then
        Run Program 'Temperature Warm' (Then Path)
 
Else
   - No Actions - (To add one, press 'Action')
 
When it warms
Only runs if it was cold during last check


Download these programs: Temperature Alerts.zip



ISY-99i Series INSTEON: WeatherBug