ISY Portal Amazon Echo Integration V3

From Universal Devices, Inc. Wiki
Revision as of 00:52, 28 November 2017 by Mkohanim (Talk | contribs)

Jump to: navigation, search

Please follow the instructions here to setup Echo to work with your ISY:

Changes in ISY Optimized for Smart Home V3

  1. Proactive state update; this will allow to see the state of your devices on the echo mobile app in real-time.
  2. A/V Support through State Variables and Network Resources
  3. Color bulb support (Aeotec, Fibaro)
  4. Slow devices like lock will no longer return an error, unless it's very long.
  5. Locks will tell you if the lock is Jammed, or if the battery is low.
  6. NOTES:
    1. Thermostat behavior in Auto mode is completely different (see below)
    2. You may no longer be able to use multiple ISYs with one Echo Account

Proactive State Update

  • This will require the live update to be active. When you go to your Amazon Echo device list, make sure to enable the Live Update -- NOTE: This may not be working properly at this time

Thermostat Auto mode behavior

  • When in Auto mode and requesting a specific temp, the V2 skill attempted to change the appropriate setpoint. Now the V3 skill will change BOTH setpoints, one below the requested temp, one above the requested temp.

Instructions for Accessing ISY Portal

Please make sure you have ISY Portal Installed and Configured first.

Instructions for New Users

Instructions for Existing Users

Instructions to configure Alexa devices in ISY Portal

  1. Make sure you have followed all the steps in ISY Portal Installed and Configured first.
  2. Log into ISY Portal
  3. Click on My Profile at the top right corner, choose your ISY from Preferred ISY drop down
  4. Under Select Tool, choose Connectivity | Amazon Echo
  5. Click on Add Device, Scene, Program, Variable or A/V to add a new Alexa device
  6. Choose your ISY device/scene/program/state variable
  7. Enter a Spoken (This is the name Alexa will use to recognize this device), then save. NOTE : Rooms are optional and useful only for categorization in ISY Portal
  8. Using Color bulbs :
    1. When choosing your ISY device, please use the Z-Wave device ending with _186
    2. The skill has been tested with Aeotec and Fibaro color bulbs
  9. Using A/V Devices :
    1. Those are virtual devices for which you can map as many functions as you need to network resources, state variables or programs
    2. Create as many virtual A/V devices as you have physical A/V devices. Example; one for the TV, one for the Home theater, etc.
    3. All fields are optional
    4. Under Basic, use either Set Channel To, or Channel Up/Channel Down, not both.
    5. Under Volume, you can use Set Volume To, Volume Up/Volume Down, or both. If you use both, use the same State Variable.
    6. When entering a State Variable value, you can specify an absolute value, or a delta by entering + or - before the number. This can be especially useful for the Volume Up/Volume Down
    7. When you hover on a field label, you get an example of how to use it
  10. If the Smart Home Skill is already enabled on your Echo, you can send your devices to your Echo by saying : “Alexa, discover my devices”.
  11. If the Smart Home Skill has not been enabled on your Echo yet, please continue with the instructions below.

Instructions for Migrating from V2 to V3

  1. Review the ISY Optimized for Smart Home V3 Changes
  2. To use V3, you first need to uninstall V2 :
    1. Login to the Echo App
    2. Click on the Smart Home menu item on the left navigation bar
    3. Click on Smart Home Skills
    4. Look for ISY Optimized for Smart Home V2 and then click on the Disable button
    5. On « ISY Optimized for Smart Home V3 », click on Disable, then « Disable skill ».
  3. Then you need to forget your existing devices:
    1. In the echo app, click on the Smart Home menu item on the left navigation bar
    2. Click on Devices
    3. Scroll to the bottom and click Forget All, then Forget NOTE : Your devices will be rediscovered by the V3 skill
  4. Continue with Instructions to Enable the V3 skill in the echo app below

Instructions to Enable the V3 Skill in the Echo App

  1. Make sure you have followed all the steps in Instructions for Accessing ISY Portal
  2. Login to the Echo App
  3. Click on Skills menu item on the left navigation bar
  4. Search for ISY
  5. Click on ISY Optimized for Smart Home V3 and then Enable
  6. On the ISY Portal Authorization page, enter your ISY Portal user name and password
  7. Then click Discover Devices
  8. The devices you have configured in ISY Portal will be imported in the Alexa App. Click on Smart Home then Devices to see them

NOTE : Please note that the ISY Optimized for Smart Home V3 skill is presently restricted to US and Canada.

Supported Commands


  • Turn On: “Alexa, turn on the kitchen light”
  • Turn Off: “Alexa, turn off the kitchen light”
  • Brighten: “Alexa, brighten the kitchen light”
  • Dim: “Alexa, dim the kitchen light”
  • Set: “Alexa, set the kitchen light to 50%”


  • Set [device] temperature to [##] degrees: "Alexa, set bedroom to 75 degrees"
  • Increase the [device] temperature: "Alexa, increase the bedroom temperature"
  • Decrease the [device] temperature: "Alexa, decrease the family room temperature"
  • Turn off [device]: "Alexa, turn off kitchen"
  • What is
    • "Alexa, what is the temperature of kitchen thermostat?"
    • "Alexa, what is the kitchen thermostat set to?"

Door locks

  • Is Locked: "Alexa, is front door locked?"
  • Is Unlocked: "Alexa, is front door unlocked?"
  • Lock: "Alexa, lock the front door"
  • Please note that, for security reasons, Unlock is not supported


  • Turn On: “Alexa, turn on the kitchen light”
  • Turn Off: “Alexa, turn off the kitchen light”
  • Brighten: “Alexa, brighten the kitchen light” -- will issue brighten command 3 times
  • Dim: “Alexa, dim the kitchen light” -- will issue dim command 3 times


  • Turn On: “Alexa, turn on the kitchen light” - runs Then
  • Turn Off: “Alexa, turn off the kitchen light” - runs Else (NOTE Currently not working)

State Variables

  • Turn On: “Alexa, turn on X” - Sets the variable X to the <turn on> value (defined in the portal)
  • Turn On: “Alexa, turn on X to Y percent” - Sets the variable X to Y
  • Turn Off: “Alexa, turn off X” - Sets the variable X to the <turn off> value (defined in the portal)
  • Brighten: “Alexa, brighten X” - Increments variable X by 1
  • Brighten: “Alexa, brighten X by Y percent” - Increments variable X by Y
  • Dim: “Alexa, dim X” - Decrements variable X by 1
  • Dim: “Alexa, dim X by Y percent” - Decrements variable X by Y
  • Contrary to regular devices, you can use the same state variables multiple times. This allows you to have 2 different spokens for the same var, but with different turn on values
  • The word "percent" is optional but recommended. Depending on your spoken and how well you pronounce, the word "percent" may be skipped. But it does facilitate proper recognition if you use it
  • You can use "increase" and "decrease" instead of brighten and dim. But depending on your spoken and how well you pronounce, increase is often misunderstood as a volume adjustment
  • You can assign turn on / turn off values with very high values. However, when you set it to a percentage, or use brighten/dim, the value can only be 0-100. For Alexa, it's a percentage after all

Color Devices

  • Set Color: "Alexa, set <device> to <color>" e.g:
    • Alexa, set living room to green
    • Alexa, set kitchen to warm white
  • Set Color Temperature : "Alexa, make <device> cooler"

A/V Devices

  • Turn on|off : "Alexa turn <on|off> <device>"
  • Set channel : "Alexa, set channel to <number> on <device>"
  • Change channel : "Alexa, channel <up|down> on <device>"
  • Set volume : "Alexa, set volume to <number> on <device>"
  • Change volume : "Alexa, volume <up|down> on <device>"
  • Mute : "Alexa, <mute|unmute> on <device>"
  • Playback : "Alexa, <play|pause|stop|fast forward|rewind|next|previous|start over> on <device>"

Instructions for using Multiple ISYs with one Echo Accout

  • This may no longer work with V3 since proactive state updates may prevent Alexa from talking to devices that are offline

Instructions for using Multiple Echos Smart Home

To support multiple Echos with different Smart Home devices, you need multiple ISY Portal sub-accounts with each their own user profile.

  1. Have your Echos tied to different amazon accounts
  2. In ISY Portal, configure a sub-account and user profile per echo:
    1. Login to your main ISY Portal account
    2. Create a sub-account
    3. Add your ISY to this sub-account, and approve access to it in the admin console
    4. Create a new user profile In that sub-account
    5. Logout of your main account
    6. Login using the newly created user-profile
    7. Click on My Profile, and set My Preferred ISY to your ISY.
    8. Enter your spokens

You can update your spokens by using your main account. But before doing so, please make sure to switch to the correct sub-account first.

If your account selector is set to [All], you will see all of your ISYs, no matter which account/sub-account they belong to. When an ISY is in several account/sub-accounts, you will see it only once. When you edit your spokens, without explicitly choosing the account, you can't be sure of the context of which account you are working on. You should switch to the intended account first.

NOTE: It is perfectly ok to use the main account for one of your Echos.