Difference between revisions of "Z-Wave: Ordering/Assembly Instructions"

From Universal Devices, Inc. Wiki
Jump to: navigation, search
(Discounts)
(Identifying the 300 series by its protruding LED)
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== Compatibility and Prerequisites==
+
== Introduction ==
If you have ISY994 ZW Series (models that include ZW in the number), then this module is already included and you do NOT need it.
+
This product can be operated in any Z-Wave™ network with other Z-Wave certified devices from other
 +
manufacturers. All non-battery operated nodes within the network will act as repeaters regardless
 +
of vendor to increase reliability of the network.
  
 +
To Factory Reset the Z-Wave dongle, follow the factory reset instructions in the [[ISY_Users:V5:ZWave:User_Guide|User Guide]] after
 +
the dongle has been installed in the ISY.
  
'''IMPORTANT NOTE'''
+
== Compatibility and Prerequisites==
 +
Since 3Q2018, all our Z-Wave dongles were migrated to 500 Series. As such, and in order to support this board, you will need to upgrade your firmware to [https://forum.universal-devices.com/forum/15-current-release-betas-and-bug-reports/ '''5.1.0'''].
  
Since 3Q2018, all our Z-Wave dongles were migrated to 500 Series. As such, and in order to support this board, you will need to upgrade your firmware to '''5.1.0''' and higher.
+
If you want to install firmware 5.2.0, or higher (Z-Wave Plus™ Certification), then you must make sure that you have the 500 series dongle. Please see below for upgrade discounts.
  
 
==Discounts==
 
==Discounts==
Line 12: Line 17:
 
* If you purchased your '''new''' unit between 2017 and 2018, you are entitled to a $35.00 discount
 
* If you purchased your '''new''' unit between 2017 and 2018, you are entitled to a $35.00 discount
 
* If you purchased your '''new''' unit between 2015 and 2017, you are entitled to a $20.00 discount
 
* If you purchased your '''new''' unit between 2015 and 2017, you are entitled to a $20.00 discount
* If you purchased your unit before 2015, you are entitled to a $10.00 discount
+
* If you purchased your '''new''' unit in 2015, you are entitled to a $10.00 discount
 +
* Otherwise, you are not eligible for any discounts
  
 
In order to receive the discount, please send your invoice or UUID to [mailto:sales@universal-devices.com?subject=ZW+%20Discount sales@universal-devices.com] and request for a discount.  
 
In order to receive the discount, please send your invoice or UUID to [mailto:sales@universal-devices.com?subject=ZW+%20Discount sales@universal-devices.com] and request for a discount.  
Line 27: Line 33:
 
== Ordering Instructions ==
 
== Ordering Instructions ==
  
You can also purchase this module from [You can also purchase this module (including the module) from [https://www.orchestratedhome.com/shop/pc/Z-wave-Radio-Add-on-Board-for-ISY-994i-116p368.htm Orchestrated Home]
+
You can purchase this module from us here https://www.universal-devices.com/product/z-wave-module/ You can also purchase this module from [https://www.orchestratedhome.com/shop/pc/Z-wave-Radio-Add-on-Board-for-ISY-994i-116p368.htm Orchestrated Home]
 
+
  
 +
== Identifying 300 Series Z-Wave By The Protruding LED ==
 +
The 300 series will have an LED protruding out of the rear of ISY and may have an antenna mount as well.
 
[[{{ns:6}}:Z-Wave-Back.png | bottom| Perforated Enclosure]]
 
[[{{ns:6}}:Z-Wave-Back.png | bottom| Perforated Enclosure]]
  
Line 59: Line 66:
 
Now that you have assembled ISY/Z-Wave Dongle, you will need to purchase the Z-Wave Module by going through Help | Purchase Modules | Z-Wave Module in the Admin Console. The price will be $1.00.
 
Now that you have assembled ISY/Z-Wave Dongle, you will need to purchase the Z-Wave Module by going through Help | Purchase Modules | Z-Wave Module in the Admin Console. The price will be $1.00.
  
== Are you an Alpha Tester? ==
+
== Upgrading from 300 Series ==
  
 +
If you are upgrading from the 300 series, make sure you do:
 +
* Z-Wave | Tools | Backup
 +
* File | Backup ISY
 +
* Follow the assembly instructions to swap the Z-Wave dongle with the 500 series version
 +
* Upgrade to [https://forum.universal-devices.com/forum/15-current-release-betas-and-bug-reports/ 5.2.0 or above]
 +
* Z-Wave | Restore
  
If you are a member of our Alpha Tester group for Z-Wave, you are entitled to get our Gen II Z-Wave dongle free of charge (minus shipping charges). Please send your contact information to sales@universal-devices.com with subject "Z-Wave Alpha-2-GenII".
 
Thank you!
 
  
  
  
 
==Related Pages==
 
==Related Pages==
* [[ISY-ZWAVE-ALPHA:Z-Wave_Alpha|Alpha Instructions]]
+
* [[ISY_Users:V5:ZWave:User_Guide|User Guide]]

Latest revision as of 19:44, 20 October 2020

Introduction

This product can be operated in any Z-Wave™ network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.

To Factory Reset the Z-Wave dongle, follow the factory reset instructions in the User Guide after the dongle has been installed in the ISY.

Compatibility and Prerequisites

Since 3Q2018, all our Z-Wave dongles were migrated to 500 Series. As such, and in order to support this board, you will need to upgrade your firmware to 5.1.0.

If you want to install firmware 5.2.0, or higher (Z-Wave Plus™ Certification), then you must make sure that you have the 500 series dongle. Please see below for upgrade discounts.

Discounts

If you have a 300 Series board and wish to upgrade to 500 Series, the following discounts apply:

  • If you purchased your new unit in 2018 or later, you are entitled to a $45.00 discount
  • If you purchased your new unit between 2017 and 2018, you are entitled to a $35.00 discount
  • If you purchased your new unit between 2015 and 2017, you are entitled to a $20.00 discount
  • If you purchased your new unit in 2015, you are entitled to a $10.00 discount
  • Otherwise, you are not eligible for any discounts

In order to receive the discount, please send your invoice or UUID to sales@universal-devices.com and request for a discount.

Note: this discount is only available from our store.

What does it look like?

Our Z-Wave dongle is a daughter board which attaches to the extra I/O pin on ISY994 Series.

Dongle

Ordering Instructions

You can purchase this module from us here https://www.universal-devices.com/product/z-wave-module/ You can also purchase this module from Orchestrated Home

Identifying 300 Series Z-Wave By The Protruding LED

The 300 series will have an LED protruding out of the rear of ISY and may have an antenna mount as well. Perforated Enclosure

Activation Instructions

Once the module has been installed (please see assembly instructions below), you will need to purchase the Z-Wave Module by going through Help | Purchase Modules | Z-Wave Module in the Admin Console. The price will be $1.00.


Assembly Instructions

  • Open ISY
    • Unplug ISY from power
    • There are four screws on the back which should be removed

Bottom Screws

  • Prepare the Enclosure
    • Take ISY board out of the enclosure
  • Attach the Dongle to ISY' expansion slot
    • Plugin the Dongle into the Bottom Row of ISY expansion slot

Bottom Screws

  • Put everything back
    • Push ISY board back into the enclosure starting with the side where all the LEDs are
  • Activate the Z-Wave Module

Now that you have assembled ISY/Z-Wave Dongle, you will need to purchase the Z-Wave Module by going through Help | Purchase Modules | Z-Wave Module in the Admin Console. The price will be $1.00.

Upgrading from 300 Series

If you are upgrading from the 300 series, make sure you do:

  • Z-Wave | Tools | Backup
  • File | Backup ISY
  • Follow the assembly instructions to swap the Z-Wave dongle with the 500 series version
  • Upgrade to 5.2.0 or above
  • Z-Wave | Restore



Related Pages