ISY-994i Series:EMail and Networking Substitution Variables
(Redirected from ISY-994i Series INSTEON:Custom Email Substitution Variables)
Note
In case of email customized content, Both the Subject and the Body' must be non empty otherwise, emails shall not be sent!
Substitution Variables
- Custom Email definitions are available in the Admin Console by going to the Configuration / Emails/Notifications / Customizations tab
- Substitution variables are available inside custom email definitions in the form ${<variable name>}.
- Substitutions can be manually made in the body, URL or header of Network Resources from version 4.3.26. If you included them in the URL then you cannot use the 'Encode URL' option
- In most cases, these variables use the ID of the element being referenced
- For example ${sys.node.11 22 AA 1.name} would use the name of the device node whose address is 11 22 AA 1
- Instead of specifying a fixed address, the special character # may be used to reference the element in the event that caused the program to run. (Does not work in network resources)
- For example, if a status event for node 11 22 AA 1 caused a program to run, then ${sys.node.#.name} would use 11 22 AA 1 as the address.
- If a variable has more than one ID then any combination of fixed addresses and # is valid. For example, the following are all valid
- ${elk.keypad.1.key.1.led} -- Show LED status of F1 Key on Keypad 1
- ${elk.keypad.#.key.#.led} -- Show LED status of event Key on event Keypad
- ${elk.keypad.#.key.3.led} -- Show LED status of F3 Key on event Keypad
- ${elk.keypad.1.key.#.led} -- Show LED status of event Key on Keypad 1
- User defined Integer and State variables are referenced with their type (1-Integer, 2-State) and ID Number for example: ${var.2.3} for the state variable with ID # 3
Formatting Tags
(available in Polisy 5.4.1)
An optional tag may be appended to the variable name indicating how the resulting text should be formatted.
| Tag Name | Example | Type | Description |
|---|---|---|---|
| :url | ${sys.node.#.name:url} | URL encoded | e.g. "Hello World" becomes "Hello%20World" |
| :std | ${sys.node.#.name:std} | Standard formatting | Formats with no conversion |
| no tag | ${sys.node.#.name} | Default formatting | Currently the same as :std |
Note: If you are using a Formatting Tag then it is always apecified at the end. e.g. ${sys.node.#.ST.raw:url}
System Variables
| Value Name | Description |
|---|---|
| ${sys.date} | Date |
| ${sys.time} | Time |
| ${sys.time24} | Time (24 hour) |
| ${sys.time12} | Time (am/pm) |
| ${sys.sunrise} | Sunrise |
| ${sys.sunrise12} | Sunrise (am/pm) |
| ${sys.sunrise24} | Sunrise (24 hour) |
| ${sys.sunset} | Sunset |
| ${sys.sunset12} | Sunset (am/pm) |
| ${sys.sunset24} | Sunset (24 hour) |
User Variables
| Value Name | Description |
|---|---|
| ${var.<valueType>.<valueID>} | Type 1 = Integer, Type 2 = State |
Device Variables and Properties
Many properties are subject to device capability You can obtain all available properties for a specific node via the REST API at /rest/nodes/<address>
A formatted representation of a value is normally used when substituting a device status variable (e.g. "100%" for a dimmer), but there is an option to choose a different form of the value by adding an extension to the name.
| Extension | Example | Type | Description |
|---|---|---|---|
| .raw | ${sys.node.#.ST.raw} | Raw Value | Shows the raw value rather than the formatted value e.g. for an Insteon dimmer status show "255" instead of "100%" |
| .uom.id | ${sys.node.#.ST.uom.id} | Unit of Measure | Shows the numeric unit of measure of the raw value rather than the value itself e.g. for the current temperature show "17" (fahrenheit) |
| not specified | ${sys.node.#.ST} | Default formatting | Shows the formatted value e.g. for an Insteon dimmer status show "100%" instead of "255" |
| Variable | Example | Description |
|---|---|---|
| sys.node.<address>.name | sys.node.11 22 AA 1.name | Name of the device node |
| sys.node.<address>.addr | sys.node.#.addr | Address of the device node |
| sys.node.<address>.ADRPST | sys.node.11 22 AA 1.ADRPST | Auto DR Processing State |
| sys.node.<address>.AIRFLOW | sys.node.11 22 AA 1.AIRFLOW | Air Flow |
| sys.node.<address>.ALARM | sys.node.11 22 AA 1.ALARM | An alarm occurred |
| sys.node.<address>.ANGLPOS | sys.node.11 22 AA 1.ANGLPOS | Angle Position |
| sys.node.<address>.ATMPRES | sys.node.11 22 AA 1.ATMPRES | Atmospheric Pressure |
| sys.node.<address>.AWAKE | sys.node.11 22 AA 1.AWAKE | Awake |
| sys.node.<address>.BARPRES | sys.node.11 22 AA 1.BARPRES | Barometric Pressure |
| sys.node.<address>.BATLVL | sys.node.11 22 AA 1.BATLVL | Battery level |
| sys.node.<address>.BEEP | sys.node.11 22 AA 1.BEEP | Beep |
| sys.node.<address>.BMAN | sys.node.11 22 AA 1.BMAN | Deprecated - Use FDUP or FDDOWN |
| sys.node.<address>.BRT | sys.node.11 22 AA 1.BRT | Brighten |
| sys.node.<address>.BUSY | sys.node.11 22 AA 1.BUSY | Device is Busy |
| sys.node.<address>.CC | sys.node.11 22 AA 1.CC | Current Current |
| sys.node.<address>.CLIEMD | sys.node.11 22 AA 1.CLIEMD | Energy Mode |
| sys.node.<address>.CLIFRS | sys.node.11 22 AA 1.CLIFRS | Fan Running State |
| sys.node.<address>.CLIFS | sys.node.11 22 AA 1.CLIFS | Fan Setting |
| sys.node.<address>.CLIFSO | sys.node.11 22 AA 1.CLIFSO | Fan Setting Override |
| sys.node.<address>.CLIHCS | sys.node.11 22 AA 1.CLIHCS | Heat/Cool State |
| sys.node.<address>.CLIHUM | sys.node.11 22 AA 1.CLIHUM | Humidity |
| sys.node.<address>.CLIMD | sys.node.11 22 AA 1.CLIMD | Thermostat Mode |
| sys.node.<address>.CLISMD | sys.node.11 22 AA 1.CLISMD | Schedule Mode |
| sys.node.<address>.CLISPC | sys.node.11 22 AA 1.CLISPC | Cool Setpoint |
| sys.node.<address>.CLISPH | sys.node.11 22 AA 1.CLISPH | Heat Setpoint |
| sys.node.<address>.CLITEMP | sys.node.11 22 AA 1.CLITEMP | Current Temperature |
| sys.node.<address>.CO2LVL | sys.node.11 22 AA 1.CO2LVL | CO2 Level |
| sys.node.<address>.CPW | sys.node.11 22 AA 1.CPW | Current Power Used |
| sys.node.<address>.CTL | sys.node.11 22 AA 1.CTL | Controller Action |
| sys.node.<address>.CV | sys.node.11 22 AA 1.CV | Current Voltage |
| sys.node.<address>.DELAY | sys.node.11 22 AA 1.DELAY | Delay |
| sys.node.<address>.DEWPT | sys.node.11 22 AA 1.DEWPT | Dew Point |
| sys.node.<address>.DFOF | sys.node.11 22 AA 1.DFOF | Fast Off |
| sys.node.<address>.DFON | sys.node.11 22 AA 1.DFON | Fast On |
| sys.node.<address>.DIM | sys.node.11 22 AA 1.DIM | Dim |
| sys.node.<address>.DISTANC | sys.node.11 22 AA 1.DISTANC | Distance |
| sys.node.<address>.DOF | sys.node.11 22 AA 1.DOF | Off |
| sys.node.<address>.DOF3 | sys.node.11 22 AA 1.DOF3 | Off 3 Key Presses |
| sys.node.<address>.DOF4 | sys.node.11 22 AA 1.DOF4 | Off 4 Key Presses |
| sys.node.<address>.DOF5 | sys.node.11 22 AA 1.DOF5 | Off 5 Key Presses |
| sys.node.<address>.DON | sys.node.11 22 AA 1.DON | On |
| sys.node.<address>.DON3 | sys.node.11 22 AA 1.DON3 | On 3 Key Presses |
| sys.node.<address>.DON4 | sys.node.11 22 AA 1.DON4 | On 4 Key Presses |
| sys.node.<address>.DON5 | sys.node.11 22 AA 1.DON5 | On 5 Key Presses |
| sys.node.<address>.DUR | sys.node.11 22 AA 1.DUR | Duration |
| sys.node.<address>.ELECCON | sys.node.11 22 AA 1.ELECCON | Electrical Conductivity |
| sys.node.<address>.ELECRES | sys.node.11 22 AA 1.ELECRES | Electrical Resistivity |
| sys.node.<address>.ERR | sys.node.11 22 AA 1.ERR | Error |
| sys.node.<address>.FDDOWN | sys.node.11 22 AA 1.FDDOWN | Fade Down |
| sys.node.<address>.FDSTOP | sys.node.11 22 AA 1.FDSTOP | Fade Stop |
| sys.node.<address>.FDUP | sys.node.11 22 AA 1.FDUP | Fade Up |
| sys.node.<address>.GPV | sys.node.11 22 AA 1.GPV | General Purpose Value |
| sys.node.<address>.GVOL | sys.node.11 22 AA 1.GVOL | Water Volume |
| sys.node.<address>.HAIL | sys.node.11 22 AA 1.HAIL | Hail |
| sys.node.<address>.LUMIN | sys.node.11 22 AA 1.LUMIN | Luminance |
| sys.node.<address>.MODE | sys.node.11 22 AA 1.MODE | Mode |
| sys.node.<address>.MOIST | sys.node.11 22 AA 1.MOIST | Moisture |
| sys.node.<address>.OL | sys.node.11 22 AA 1.OL | On Level |
| sys.node.<address>.PF | sys.node.11 22 AA 1.PF | Power Factor |
| sys.node.<address>.PPW | sys.node.11 22 AA 1.PPW | Polarized Power Used |
| sys.node.<address>.PULSCNT | sys.node.11 22 AA 1.PULSCNT | Pulse Count |
| sys.node.<address>.QUERY | sys.node.11 22 AA 1.QUERY | Query Device |
| sys.node.<address>.RAINRT | sys.node.11 22 AA 1.RAINRT | Rain Rate |
| sys.node.<address>.RESET | sys.node.11 22 AA 1.RESET | Reset values |
| sys.node.<address>.ROTATE | sys.node.11 22 AA 1.ROTATE | Rotation |
| sys.node.<address>.RR | sys.node.11 22 AA 1.RR | Ramp Rate |
| sys.node.<address>.SECMD | sys.node.11 22 AA 1.SECMD | Device secure mode |
| sys.node.<address>.SEISINT | sys.node.11 22 AA 1.SEISINT | Seismic Intensity |
| sys.node.<address>.SEISMAG | sys.node.11 22 AA 1.SEISMAG | Seismic Magnitude |
| sys.node.<address>.SMAN | sys.node.11 22 AA 1.SMAN | Deprecated - Use FDSTOP |
| sys.node.<address>.SOILT | sys.node.11 22 AA 1.SOILT | Soil Temperature |
| sys.node.<address>.SOLRAD | sys.node.11 22 AA 1.SOLRAD | Solar Radiation |
| sys.node.<address>.SPEED | sys.node.11 22 AA 1.SPEED | Velocity |
| sys.node.<address>.ST | sys.node.11 22 AA 1.ST | Status |
| sys.node.<address>.SVOL | sys.node.11 22 AA 1.SVOL | Sound Volume |
| sys.node.<address>.TANKCAP | sys.node.11 22 AA 1.TANKCAP | Tank Capacity |
| sys.node.<address>.TIDELVL | sys.node.11 22 AA 1.TIDELVL | Tide Level |
| sys.node.<address>.TIMEREM | sys.node.11 22 AA 1.TIMEREM | Time remaining |
| sys.node.<address>.TPW | sys.node.11 22 AA 1.TPW | Total Energy Used |
| sys.node.<address>.UAC | sys.node.11 22 AA 1.UAC | Valid user access code entered |
| sys.node.<address>.UOM | sys.node.11 22 AA 1.UOM | Unit |
| sys.node.<address>.USRNUM | sys.node.11 22 AA 1.USRNUM | User access code |
| sys.node.<address>.UV | sys.node.11 22 AA 1.UV | Ultraviolet |
| sys.node.<address>.VOCLVL | sys.node.11 22 AA 1.VOCLVL | Volatile Organic Compound (VOC) level |
| sys.node.<address>.WATERT | sys.node.11 22 AA 1.WATERT | Water Temperature |
| sys.node.<address>.WEIGHT | sys.node.11 22 AA 1.WEIGHT | Weight |
| sys.node.<address>.WINDDIR | sys.node.11 22 AA 1.WINDDIR | Wind Direction |
| sys.node.<address>.WVOL | sys.node.11 22 AA 1.WVOL | Water Volume |
| sys.node.<address>.GV0 | sys.node.11 22 AA 1.GV0 | Custom Control 0 |
| sys.node.<address>.GV1 | sys.node.11 22 AA 1.GV1 | Custom Control 1 |
| sys.node.<address>.GV2 | sys.node.11 22 AA 1.GV2 | Custom Control 2 |
| sys.node.<address>.GV3 | sys.node.11 22 AA 1.GV3 | Custom Control 3 |
| sys.node.<address>.GV4 | sys.node.11 22 AA 1.GV4 | Custom Control 4 |
| sys.node.<address>.GV5 | sys.node.11 22 AA 1.GV5 | Custom Control 5 |
| sys.node.<address>.GV6 | sys.node.11 22 AA 1.GV6 | Custom Control 6 |
| sys.node.<address>.GV7 | sys.node.11 22 AA 1.GV7 | Custom Control 7 |
| sys.node.<address>.GV8 | sys.node.11 22 AA 1.GV8 | Custom Control 8 |
| sys.node.<address>.GV9 | sys.node.11 22 AA 1.GV9 | Custom Control 9 |
| sys.node.<address>.GV10 | sys.node.11 22 AA 1.GV10 | Custom Control 10 |
| sys.node.<address>.GV11 | sys.node.11 22 AA 1.GV11 | Custom Control 11 |
| sys.node.<address>.GV12 | sys.node.11 22 AA 1.GV12 | Custom Control 12 |
| sys.node.<address>.GV13 | sys.node.11 22 AA 1.GV13 | Custom Control 13 |
| sys.node.<address>.GV14 | sys.node.11 22 AA 1.GV14 | Custom Control 14 |
| sys.node.<address>.GV15 | sys.node.11 22 AA 1.GV15 | Custom Control 15 |
| sys.node.<address>.GV16 | sys.node.11 22 AA 1.GV16 | Custom Control 16 |
| sys.node.<address>.GV17 | sys.node.11 22 AA 1.GV17 | Custom Control 17 |
| sys.node.<address>.GV18 | sys.node.11 22 AA 1.GV18 | Custom Control 18 |
| sys.node.<address>.GV19 | sys.node.11 22 AA 1.GV19 | Custom Control 19 |
| sys.node.<address>.GV20 | sys.node.11 22 AA 1.GV20 | Custom Control 20 |
Elk Variables
| Variable | Example | Description |
|---|---|---|
| elk.area.<areaNumber>.name | elk.area.1.name | Name of the Area |
| elk.area.<areaNumber>.armedState | elk.area.1.armedState | Area Armed State |
| elk.area.<areaNumber>.armUpState | elk.area.1.armUpState | Area Arm Up State |
| elk.area.<areaNumber>.alarmState | elk.area.1.alarmState | Area Alarm Status |
| elk.area.<areaNumber>.bypassState | elk.area.1.bypassState | Area Bypass State |
| elk.zone.<zoneNumber>.name | elk.zone.1.name | Name of the zone |
| elk.zone.<zoneNumber>.alarmDef | elk.zone.1.alarmDef | Zone Alarm definition |
| elk.zone.<zoneNumber>.voltage | elk.zone.1.voltage | Zone voltage |
| elk.zone.<zoneNumber>.status | elk.zone.1.status | Zone status |
| elk.zone.<zoneNumber>.pstatus | elk.zone.1.pstatus | Zone physical status |
| elk.zone.<zoneNumber>.bypassState | elk.zone.1.bypassState | Zone bypass state |
| elk.zone.<zoneNumber>.temp | elk.zone.1.temp | Zone temperature |
| elk.output.<outputNumber>.name | elk.output.1.name | Output name |
| elk.output.<outputNumber>.status | elk.output.1.status | Output status |
| elk.tstat.<thermostatNumber>.name | elk.tstat.1.name | Thermostat name |
| elk.tstat.<thermostatNumber>.ST | elk.tstat.1.ST | Thermostat temperature |
| elk.tstat.<thermostatNumber>.CLIMD | elk.tstat.1.CLIMD | Thermostat mode |
| elk.tstat.<thermostatNumber>.CLIFS | elk.tstat.1.CLIFS | Thermostat fan state |
| elk.tstat.<thermostatNumber>.CLISPH | elk.tstat.1.CLISPH | Thermostat heat setpoint |
| elk.tstat.<thermostatNumber>.CLISPC | elk.tstat.1.CLISPC | Thermostat cool setpoint |
| elk.tstat.<thermostatNumber>.CLIHOLD | elk.tstat.1.CLIHOLD | Thermostat temperature hold |
| elk.keypad.<keypadNumber>.name | elk.keypad.1.name | Keypad name |
| elk.keypad.<keypadNumber>.temp | elk.keypad.1.temp | Keypad temperature |
| elk.keypad.<keypadNumber>.key.<keyNumber>.led | elk.keypad.1.key.2.led | Key LED state |
Weather Variables
| Variable | Example | Comments |
|---|---|---|
| Temperature: | ${mod.weather.temp.current} | Current Temperature |
| High Temperature: | ${mod.weather.temp.high} | Highest reached today |
| Low Temperature: | ${mod.weather.temp.low} | Lowest reached today |
| Feels Like: | ${mod.weather.temp.feelslike} | Current temperature but factors in wind chill and humidity. |
| Average Temperature: | ${mod.weather.temp.avg} | Avg temp from Midnight till now |
| Humidity: | ${mod.weather.humidity} | Current Humidity |
| Pressure: | ${mod.weather.pressure} | Current Pressure |
| Dew Point: | ${mod.weather.dewpoint} | Current Dew Point |
| Wind Speed: | ${mod.weather.wind.speed} | Current Wind Speed |
| Wind Direction: | ${mod.weather.wind.direction} | Current Wind Direction |
| Wind Gust Speed: | ${mod.weather.gust.speed} | Current Wind Gust Speed |
| Gust Wind Direction: | ${mod.weather.gust.direction} | Current Gust Direction |
| Light: | ${mod.weather.light.level} | Current Light Level |
| Total Rain Today: | ${mod.weather.rain.today} | Rain so far today. |
| Elevation: | ${mod.weather.elevation} | Elevation at Weather Station |
| Coverage: | ${mod.weather.coverage} | Defines things such as areas, chances, etc. See key below. |
| Intensity: | ${mod.weather.intensity} | Defines things such as light, heavy, etc See key below. |
| Condition: | ${mod.weather.condition} | Defines things such as Hail, rain, showers, etc. See key below. |
| Cloud Condition: | ${mod.weather.cloud.condition} | Defines things such as clear, sunny, cloudy, etc. See key below. |
| 24Hr High Temperature: | ${mod.weather.temp.hi.24h} | Forecast high temperature next 24 hours. |
| 24Hr Low Temperature: | ${mod.weather.temp.low.24h} | Forecast low temperature next 24 hours. |
| 24Hr Average Temperature: | ${mod.weather.temp.avg.24h} | Forecast average temperature next 24 hours. |
| 24Hr Humidity: | ${mod.weather.humidity.24h} | Forecast humidity next 24 hours. |
| 24Hr Rain: | ${mod.weather.rain.24h} | Forecast rainfall next 24 hours. |
| 24Hr Snow: | ${mod.weather.snow.24h} | Forecast snowfall next 24 hours. |
| 24 Hr Coverage: | ${mod.weather.coverage.24h} | Forecast coverage next 24 hours. See key below. |
| 24Hr Intensity: | ${mod.weather.intensity.24h} | Forecast intensity next 24 hours. See key below. |
| 24Hr Condition: | ${mod.weather.condition.24h} | Forecast condition next 24 hours. See key below. |
| 24Hr Cloud Condition: | ${mod.weather.cloud.condition.24h} | Forecast cloud cover next 24 hours. See key below. |
| Avg Temperature Tomorrow: | ${mod.weather.temp.avg.tomorrow} | Forecast average temperature tomorrow. |
| High Temperature Tomorrow: | ${mod.weather.temp.hi.tomorrow} | Forecast high temperature tomorrow. |
| Low Temperature Tomorrow: | ${mod.weather.temp.low.tomorrow} | Forecast low temperature tomorrow. |
| Humidity Tomorrow: | ${mod.weather.humidity.tomorrow} | Forecast humidity tomorrow. |
| Wind Speed Tomorrow: | ${mod.weather.wind.speed.tomorrow} | Forecast wind speed tomorrow. |
| Wind Gust Speed Tomorrow: | ${mod.weather.gust.speed.tomorrow} | Forecast wind gust tomorrow. |
| Rain Tomorrow: | ${mod.weather.rain.tomorrow} | Forecast rainfall tomorrow. |
| Snow Tomorrow: | ${mod.weather.snow.tomorrow} | Forecast snowfall tomorrow. |
| Coverage Tomorrow: | ${mod.weather.coverage.tomorrow} | Forecast coverage tomorrow. See key below. |
| Intensity Tomorrow: | ${mod.weather.intensity.tomorrow} | Forecast intensity tomorrow. See key below. |
| Condition Tomorrow: | ${mod.weather.condition.tomorrow} | Forecast condition tomorrow. See key below. |
| Cloud Condition Tomorrow: | ${mod.weather.cloud.condition.tomorrow} | Forecast cloud cover tomorrow. See key below. |
Climate Data Key
Climate Coverage defines things such as areas, chances, etc.
- Value 1 - Areas of
- Value 2 - Brief
- Value 3 - Chance of
- Value 4 - Definite
- Value 5 - Frequent
- Value 6 - Intermittent
- Value 7 - Isolated
- Value 8 - Likely
- Value 9 - Numerous
- Value 10 - Occasional
- Value 11 - Patchy
- Value 12 - Periods of
- Value 13 - Slight chance
- Value 14 - Scattered
- Value 15 - In the vicinity / Nearby
- Value 16 - Widespread
Climate Intensity defines things such as light, heavy, etc.
- Value 1 - Very light
- Value 2 - Light
- Value 3 - Heavy
- Value 4 - Very heavy
Climate Weather Condition defines things such as Hail, rain, showers, etc.
- Value 1 - Hail
- Value 2 - Blowing dust
- Value 3 - Blowing sand
- Value 4 - Mist
- Value 5 - Blowing snow
- Value 6 - Fog
- Value 7 - Frost
- Value 8 - Haze
- Value 9 - Ice Crystals
- Value 10 - Ice fog
- Value 11 - Ice pellets / sleet
- Value 12 - Smoke
- Value 13 - Drizzle
- Value 14 - Rain
- Value 15 - Rain showers
- Value 16 - Rain/snow mix
- Value 17 - Snow/sleet mix
- Value 18 - Wintry mix
- Value 19 - Snow
- Value 20 - Snow showers
- Value 21 - Thunderstorms
- Value 22 - Unknown Precipitation (May Occur in an automated observation station, which cannot determine the precip type falling.)
- Value 23 - Volcanic ash
- Value 24 - Water spouts
- Value 25 - Freezing fog
- Value 26 - Freezing drizzle
- Value 27 - Freezing rain
- Value 28 - Freezing spray
Climate Cloud Condition defines things such as clear, sunny, cloudy, etc.
- Value 1 - Clear - Cloud coverage is 0-7% of the sky.
- Value 2 - Fair/mostly sunny - Cloud coverage is 7-32% of the sky.
- Value 3 - Partly cloudy - Cloud coverage is 32-70% of the sky.
- Value 4 - Mostly cloudy - Cloud coverage is 70-95% of the sky.
- Value 5 - Cloudy