ISY-99i/ISY-26 INSTEON:Installation
ISY-26 Installation
Please perform the following steps before plugging the ISY into power:
- Connect the Ethernet cable to ISY and to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
- Connect the Serial communications cable provided with your INSTEON PLM (included in the package) to the connector marked Port A on the ISY
- Plug in the PLM into a power outlet
- Plug in the power supply into ISY and then into a power outlet
ISY-99i Series Installation
Please perform the following steps before plugging the ISY into power:
- Connect one end of the first Ethernet cable to the ISY jack marked Network, and the other end to your network hub. Note: the network must be DHCP enabled. If your DHCP is not enabled, please consult the ISY Host_Computer_Configuration_Guide
- Connect one end of the second Ethernet cable to the ISY jack marked Port A, and the other end to your PLM.
- Plug in the PLM into a power outlet.